Angerole aviation mounts | beechcraft gps mounts | control knobs | tie down rings | Charlottesville VA

facebook

Behind-The-Yoke Mount for Beechcraft (Model 241 023)

Beech Ram

Now Available! BeechRam

Our exclusive BeechRam mates directly to the inspection port on the backside of the yoke arm. It positions the iPad directly in front of the center of the yoke arm and in the center of the airplane, allowing full movement of both your hands and access to all controls. It also allows your co-pilot to operate the iPad. Two adjustable swage fittings allow the mount to swivel closer or further from the yoke arm and also in the vertical plane. Key Features: -CNC machined 6061 T6 aluminum alloy with black alodine finish and stainless steel hardware -Custom iPad mounting ball allows fine adjustment of vertical alignment -Attaches directly to the inspection port of the factory yoke arm -Fully adjustable side-to-side and up and down swivel adjustments -Rock-solid locking adjustments -Rigid, sturdy construction that prevents vibration or movement from engine vibration or turbulence and allows single-handed manipulation vibration or movement from engine vibration or turbulence and allows single-handed manipulation iPad sold separately! Our product will work with any size iPad and is shown here with an Ipad Mini 5. You will also need a cradle for your iPAD. Example for Ipad Mini 4/5- https://amzn.to/3Gzmwbp

Yoke for Beechcraft Aircraft iPad! Visit https://beechram.com/ for details!



Angerole Mounts has closed its doors for business but a newer product is now available from BeechRam! Visit https://beechram.com/ for details!

Our Behind the Yoke Mount shares the unique Angerole adaptor that clamps to the inspection hole on the back side of the Beechcraft yoke bar, but situates your GPS directly behind the yoke. Your GPS is mounted as close as possible behind the yoke to keep it clear of the panel when you're at full down elevator on the ground and to make it easier to see past when you're at neutral elevator in flight. As with all of our mounts, no drilling or modifications of any kind are required to fit this mount to your Beech. The mount works equally well on single or dual yokes. Removal of a single bolt allows you to take the unit home for updating and reprogramming.

We would like to emphasize there is a good chance a Garmin on this mount will at least partially obscure the lower instruments on your panel. Whether or how much this happens depends on many factors, such as how your panel is laid out and how tall you are. GPS units larger than the 496 will almost certainly obscure instrumentation on the panel. Please understand the considerations before you decide to buy this mount.

Features:

  • CNC machined 6061 T6 aluminum alloy with aerospace grade corrosion-resistant gold alodine finish and stainless steel hardware
  • Device/GPS mounting plate with standard electronics industry AMPS hole pattern - allows just about any Garmin GPS or iPad cradle to bolt right on. Garmin use the AMPS pattern exclusively on their cradles.
  • Fully adjustable side-to-side and up and down swivel adjustments
  • Rock-solid locking adjustments - available with optional T bar locking screw for quick removal
  • Rigid, sturdy construction that prevents vibration or movement from engine vibration or turbulence